Microsoft, Windows 10

Troubleshooting Guide: Windows 10 Stuck on Restarting

Windows 10 Stuck on Restarting

When your Windows computer gets stuck on the restarting screen, it can be a frustrating issue. This can occur due to various reasons such as system interference or update problems. In this troubleshooting guide, we will explore different solutions to fix the Windows 10 stuck on restarting problem.

Possible Causes of Windows Stuck on Restarting

When encountering the frustrating issue of Windows 10 getting stuck on the restarting screen, it’s important to understand the potential causes behind this problem. There are several factors that could contribute to Windows being unable to complete the restarting process. In this section, we will explore the possible causes in detail.

Interference from Recent Updates

One of the potential culprits for the Windows 10 stuck on restarting issue is a recent update that has interfered with the restarting process. Updates are designed to improve system performance and security, but sometimes they can create conflicts and disrupt the normal operations of the computer.

Conflict between Old and New Update Files

Another cause of the restarting problem can arise when there is a conflict between old and new update files. This conflict can occur if the installation of a new update is not properly synchronized with the removal of the older update files. The clash between these files can lead to disruptions during the restart process.

External Devices and Peripherals

Additionally, external devices and peripherals connected to the computer can also contribute to the Windows 10 stuck on restarting problem. Wired devices such as printers or external hard drives, as well as network cables for internet connectivity, may introduce compatibility issues or interfere with the restarting process.

Understanding these possible causes can help in troubleshooting the Windows 10 stuck on restarting issue effectively. In the following sections, we will discuss various solutions to resolve this problem and get your Windows computer up and running smoothly again.

Wait It Out

In some cases, when facing the Windows 10 stuck on restarting issue, it is recommended to exercise patience and wait for a certain period of time before taking further action. This is particularly necessary if you have recently updated your Windows operating system, as there can be lengthy delays at the restarting screen while the update finalizes. It is important to note that during this time, the system is still actively working to complete the updating process.

While waiting, it is advisable to avoid forcefully restarting the computer or performing any unnecessary actions that may interrupt the update. Patience is key in this situation, as the system may require additional time to finalize all the necessary changes. However, if waiting for an extended period does not resolve the issue and the computer remains stuck on the restarting screen, it is then time to proceed with further troubleshooting steps.

Table: Troubleshooting Steps – Wait It Out

Steps Description
1 Wait for at least 30 minutes
2 Avoid interrupting the update process
3 Ensure the computer is connected to a power source
4 Monitor the progress periodically

In the table above, you will find a summary of the troubleshooting steps to follow when waiting for the Windows 10 stuck on restarting problem. These steps will help ensure that you give the system enough time to complete the necessary updates without any unnecessary disruptions. Please note that these steps are only applicable if you have recently updated your Windows operating system and are experiencing lengthy delays at the restarting screen.

Remove External Devices and Peripherals

If you are experiencing the Windows 10 stuck on restarting issue, one of the troubleshooting steps you can take is to remove external devices and peripherals connected to your computer. This includes USB printers, external hard drives, and any other wired devices. Sometimes, these devices can interfere with the restarting process and cause the issue to occur. Additionally, if your computer uses Ethernet for online connectivity, try removing the network cable as well.

By removing these external devices and peripherals, you can eliminate any potential conflicts and allow Windows to restart properly. It’s recommended to disconnect all unnecessary devices before attempting to restart your computer again.

Table: Devices and Peripherals to Remove

Device Type Action
USB Printers Disconnect the printer’s USB cable from the computer.
External Hard Drives Unplug the external hard drive from the computer.
Other Wired Devices Disconnect any other wired devices connected to the computer.
Network Cable If your computer uses Ethernet for internet connectivity, unplug the network cable.

After removing these devices, restart your computer and check if the Windows 10 stuck on restarting problem is resolved. If the issue persists, you can proceed to the next troubleshooting step.

Hard Reset Your PC

When facing the frustrating issue of a Windows 10 computer stuck on the restarting screen, performing a hard reset can be a viable troubleshooting method. This involves holding down the power button on your desktop or laptop for 5-10 seconds until the screen goes dark. It is important to note that different laptops may require holding down additional buttons as well.

However, it is crucial to exercise caution when performing a hard reset, as it has the potential to corrupt the Windows operating system or personal files. In some cases, a hard reset may also result in an infinite boot cycle or Blue Screen of Death (BSOD) errors, necessitating further troubleshooting steps.

By performing a hard reset, you can effectively reset the system and potentially resolve the Windows 10 stuck on restarting problem. However, it is always recommended to back up important data before attempting any troubleshooting methods to avoid any potential loss of information.

Perform a Startup Repair

In cases where the Windows 10 stuck on restarting issue persists after trying the previous solutions, performing a Startup Repair can help diagnose and fix any startup problems that are causing the reboot loop. Startup Repair is an automatic process that can be initiated through the Windows Recovery Environment (WinRE).

To access WinRE, restart your computer and continuously press the F8 key until the Advanced Boot Options menu appears. From there, select the “Repair your computer” option. This will take you to WinRE, where you can choose the “Startup Repair” option to begin the repair process.

The Startup Repair tool will scan your system, identify any issues, and attempt to fix them automatically. It may take some time for the repair process to complete, so be patient. If the Startup Repair fails to resolve the problem, you may need to proceed with additional troubleshooting steps.

Perform a Startup Repair

  1. Restart your computer and press the F8 key to access the Advanced Boot Options menu.
  2. Select the “Repair your computer” option to enter the Windows Recovery Environment (WinRE).
  3. Choose the “Startup Repair” option in WinRE.
  4. Wait for the repair process to complete and follow any on-screen instructions.

Additional Troubleshooting Steps

If the Startup Repair fails to fix the Windows 10 stuck on restarting problem, you may need to try other troubleshooting methods such as running system file checker, checking disk utility, uninstalling new updates, performing a system restore, resetting Windows Update, or running the system maintenance troubleshooter. These methods can help identify and resolve underlying issues that may be causing the reboot loop.

Troubleshooting Method Description
System File Checker Scans and repairs corrupted system files
Check Disk Utility Checks and repairs disk errors
Uninstall New Updates Removes recent updates that may be causing the issue
Perform a System Restore Rolls back the computer to a previous state without the issue
Reset Windows Update Resets the Windows Update process to fix any update-related problems
Run System Maintenance Troubleshooter Identifies and fixes issues with third-party services and startup programs

Run System File Checker and Check Disk Utility

If you’re experiencing stability issues or suspect disk errors as the cause of the Windows 10 stuck on restarting problem, running the System File Checker and Check Disk Utility can help diagnose and fix these issues. These built-in Windows tools can help repair corrupted system files and resolve disk errors, potentially resolving the restarting problem.

Running the System File Checker

The System File Checker (SFC) is a command-line tool that scans and repairs corrupt or missing system files. To run the SFC, follow these steps:

  1. Boot your computer into the Windows Recovery Environment (WinRE) by restarting your computer and pressing the appropriate key combination during startup.
  2. Once in WinRE, open the Command Prompt console.
  3. Type the command sfc /scannow /offbootdir=C:\ /offwindir=D:\Windows and press Enter. Make sure to replace the “C:\” and “D:\Windows” with the correct drive letters and Windows installation directory if they differ on your system.
  4. Wait for the System File Checker to scan and repair any corrupted files.
  5. Once the process is complete, restart your computer and check if the Windows 10 stuck on restarting issue is resolved.

Using the Check Disk Utility

The Check Disk Utility (CHKDSK) is another command-line tool that can scan and fix errors on your computer’s hard drive. To run the CHKDSK, follow these steps:

  1. Boot your computer into the Windows Recovery Environment (WinRE) by restarting your computer and pressing the appropriate key combination during startup.
  2. Once in WinRE, open the Command Prompt console.
  3. Type the command chkdsk D: /R and press Enter. Replace the “D:” with the drive letter of the partition you want to check.
  4. Wait for the Check Disk Utility to scan and repair any disk errors.
  5. After the process is complete, restart your computer and check if the issue persists.

By running the System File Checker and Check Disk Utility, you can address stability issues and fix disk errors that may be causing the Windows 10 stuck on restarting problem. If the issue persists after running these tools, further troubleshooting steps may be required.

Uninstall New Updates

If the Windows 10 stuck on restarting issue started after a recent update, you can try uninstalling the update to resolve the problem. In the WinRE menu, select the Uninstall Updates option and choose between removing the last quality update or the last feature update. This can help if the update is causing the reboot loop.

To uninstall updates in Windows 10:

  1. Press the Windows key + I to open the Settings app.
  2. Select “Update & Security”, then click on “Windows Update”.
  3. Click on “View update history”.
  4. Choose “Uninstall updates” from the top menu.
  5. Select the update you want to uninstall, then click “Uninstall”.

Follow the on-screen instructions to complete the uninstallation process. Restart your computer after uninstalling the update and check if the Windows 10 stuck on restarting problem is resolved.

Perform a System Restore

If the previous troubleshooting methods have not resolved the Windows 10 stuck on restarting problem, performing a system restore can be an effective solution. System Restore allows you to revert your computer back to a previous state when it was functioning without any issues. This can help undo any changes or updates that may have caused the restarting problem.

To perform a system restore, follow these steps:

  1. Boot your computer into Safe Mode. Safe Mode allows you to access the advanced troubleshooting options.
  2. In the Windows Recovery Environment (WinRE) menu, select System Restore.
  3. Choose a restore point that predates the Windows 10 stuck on restarting issue. It is recommended to select a restore point from a date when your computer was working properly.
  4. Follow the on-screen instructions to initiate the system restore process.

After the system restore is complete, your computer will restart, and hopefully, the restarting problem will be resolved. If the issue persists, further troubleshooting in Safe Mode or seeking professional assistance may be necessary.

Advantages Disadvantages
Restores computer to a previous functional state May result in loss of recently installed programs or updates
Undo changes or updates that may have caused the problem Requires a restore point to be available
Does not affect personal files Cannot undo changes made to system files

Reset Windows Update

If the Windows 10 stuck on restarting issue is due to unfinalized system updates, resetting Windows Update can help resolve the problem. This process involves stopping the Windows Update service, renaming the temporary Windows Update data directory, and restarting the service. Follow the steps below to reset Windows Update:

  1. Open the Command Prompt console as an administrator.
  2. Execute the following command to stop the Windows Update service: net stop wuauserv
  3. Execute the following command to rename the temporary Windows Update data directory: ren %systemroot%\SoftwareDistribution SoftwareDistribution.old
  4. Execute the following command to restart the Windows Update service: net start wuauserv

If there are issues with the Windows Update process, resetting it can help resolve the reboot loop caused by unfinalized updates.

Summary

Resetting Windows Update is a troubleshooting method to resolve the Windows 10 stuck on restarting issue. By stopping the Windows Update service, renaming the temporary Windows Update data directory, and restarting the service, you can potentially fix reboot loops caused by unfinalized updates. This is a step-by-step process that can be performed through the Command Prompt console in administrative mode.

Please note that resetting Windows Update may not always solve the problem. If the issue persists, consider further troubleshooting steps or seek professional assistance.

Run System Maintenance Troubleshooter

The System Maintenance Troubleshooter, available in the Control Panel, is a useful tool for addressing the Windows 10 stuck on restarting issue. By initiating system maintenance tasks through the Control Panel, you can identify and resolve problems related to third-party services and startup programs that may be causing the computer to continually restart.

To access the System Maintenance Troubleshooter, follow these steps:

  1. Open the Control Panel by typing “Control Panel” in the Windows search bar and selecting the corresponding option.
  2. In the Control Panel, click on “Troubleshooting” and then select “View all” from the left-hand panel.
  3. Scroll through the list of troubleshooting tools and locate “System Maintenance.” Click on it to launch the troubleshooter.
  4. Follow the on-screen instructions to complete the troubleshooting process.

The System Maintenance Troubleshooter will scan your system for any issues and attempt to fix them automatically. This can help eliminate any conflicts or errors related to third-party services or startup programs that may be contributing to the Windows 10 stuck on restarting problem.

Summary Table: System Maintenance Troubleshooter

Troubleshooting Step Description
Step 1 Open the Control Panel
Step 2 Access “Troubleshooting” and select “View all”
Step 3 Locate and launch “System Maintenance”
Step 4 Follow on-screen instructions to complete the troubleshooting process

Conclusion

In conclusion, troubleshooting the Windows 10 stuck on restarting problem can be frustrating but manageable. By following the methods outlined in this guide, you can resolve the issue and get your computer back up and running smoothly.

First, it’s important to be patient and wait it out, especially if you have recently updated your Windows. Lengthy delays at the restarting screen can occur while the update finalizes. If waiting doesn’t work, try removing unnecessary external devices and peripherals, as they can interfere with the restarting process.

In addition, performing a hard reset, running startup repair, checking for system file and disk errors, uninstalling new updates, performing a system restore, resetting Windows Update, and running the system maintenance troubleshooter are all viable options to try. However, if none of these solutions work, you may need to consider updating your BIOS or seeking professional help.

Remember to always back up your important data before attempting any troubleshooting methods. By following these steps, you can overcome the Windows 10 stuck on restarting issue and ensure the smooth functioning of your computer.

FAQ

What are the possible causes of Windows getting stuck on restarting?

The possible causes of Windows getting stuck on restarting include interference from recent updates, conflicts between old and new update files, and external devices or peripherals disrupting the restarting process.

Should I wait for a certain period of time if Windows is stuck on the restarting screen?

It is recommended to wait if you have recently updated your Windows, as there can be lengthy delays during the restart process. However, if waiting doesn’t resolve the issue, proceed to the next troubleshooting steps.

How can I resolve the Windows 10 stuck on restarting problem?

You can try removing unnecessary external devices and peripherals, performing a hard reset, running the Startup Repair option in the Windows Recovery Environment (WinRE), using the System File Checker and Check Disk Utility, uninstalling new updates, performing a system restore, resetting Windows Update, or running the System Maintenance Troubleshooter in the Control Panel.

What should I do if none of the troubleshooting methods work?

If none of the solutions work, you can consider updating your BIOS or seeking professional help. Remember to back up your important data before attempting any troubleshooting methods.

Related Posts

Leave a Reply

Your email address will not be published. Required fields are marked *